User's Manual
6. Align the connectors. Make sure a plastic tab on the memory module sticks
up, then press on the black area of the module label above the connector to
ensure a firm connection.
CAUTIONS: 1. Press only on the black area of the label. Pressure on
2. Do not touch the connectors on the memory module or
7. Secure it with one screw that came with the memory module.
CAUTION: Use only the screw that came with the memory module.
Figure 8-8 Inserting the memory module and securing one screw
8. Seat the cover and secure it with two screws.
NOTE: Use a point size 0 Phillips screwdriver.
8-8
other parts of the module could cause damage.
on the computer. Debris on the connectors may cause
memory access problems.
Figure 8-9 Seating the cover