Approved Vent Config's With A Vertical Termination And Two 90° Elbows - Lopi Heritage Bay DV Owner's Manual

S
TOVE
P 12
AGE
Approved Venting Configurations for Vertical Terminations with Two 90° Elbows
¥ The termination must fall within the shaded area shown in the chart. Use the indicated restrictor position.
35' (max)
(10.7 M)
10 feet
8 feet (min.)
(2.4 M)
(1.5 M)
I
NSTALLATION
Restrictor
Position # 3
30 feet
(9.1 M)
25 feet
(7.5 M)
20 feet
(6 M)
15 feet
(4.6 M)
(3 M)
NOTE:
5 feet
Horizontal sections require a 1/4" (6 mm)
rise every 12" (300 mm) of travel.
Do not place an elbow directly off
the top of the heater.
0 feet
( .)
CONT
- For Qualified Installers Only!
NOTE:
Restrictor positions are based
upon lab tests. The ideal restrictor
position may vary slightly,
especially when the termination is
near a demarkation line.
35' (max)
(10.7 M)
30 feet
(9.1 M)
Restrictor
Position # 2
25 feet
(7.5 M)
20 feet
(6 M)
15 feet
(4.6 M)
Restrictor
10 feet
Position # 1
(3 M)
8 feet (min.)
(2.4 M)
5 feet
(1.5 M)
0 feet