CONNECT SERIES IMPORTANT WARNINGS & SAFETY INSTRUCTIONS Read these instructions. Follow all instructions. Keep these instructions. Heed all warnings. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Page 4
OPERATING MANUAL AND USER GUIDE ATTENTION: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR 19. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
CONNECT SERIES INTRODUCTION Congratulations on the purchase of your CONNECT series mixer. CONNECT series mixers are the result of many years of experience in the use, design and manufacture of professional audio equipment. We take great pride in engineering and building every Wharfedale Pro product and wish to thank you for entrusting us with your sound.
Page 6
OPERATING MANUAL AND USER GUIDE CONNECT 502USB FEATURES • 1 Mono Mic/Line Channel and 2 Stereo Channels • 2 Band EQs for mono channel CONNECT 802USB FEATURES • 2 Mono Mic/Line Channels and 2 Stereo Channels • 3 Band EQs for all channels CONNECT 1002FX/USB FEATURES •...
CONNECT SERIES USB INTERFACE The USB connector enables computers with USB connectivity to interface directly with the CONNECT mixer for full duplex recording and playback. In recent years the introduction of USB connectivity has ushered a new appreciation of the capabilities of computer audio, helping to fuse both digital and analogue and open up endless possibilities for the recording musician.
OPERATING MANUAL AND USER GUIDE FX Interface You have a choice of 56 different effects, from Reverb to Flanging to Delay. You can send them to the main mix outputs. . Shows the code of the selected effect 2. Shows when the FX bus is overloaded 3.
CONNECT SERIES WALKTHOUGH—CONNECT 502USB Mic 1 502USB Line In 2/3 Line In 4/5 Main Out Phones Balanced (Mono) (Mono) Line In Unbal Unbal Unbal Gain Balance Clip Mic:0 +50dB +30dB Line:-20 High Level 12KHz Power +48V 80Hz Clip USB In...
OPERATING MANUAL AND USER GUIDE WALKTHOUGH—CONNECT 802USB . Balanced XLR input for microphone 2. Balanced/Unbalanced TRS input for line level sources (for the STEREO channel) 3. Balanced/Unbalanced TRS input for line level sources 4. Clip LED lit when the signal is overloaded 5.
CONNECT SERIES WALKTHOUGH—CONNECT 1002FX/USB (also for 1202) 22 2 Logic USB In USB to Phones USB to Main . Balanced XLR input for microphone 2. Balanced/Unbalanced TRS input for line level sources 3. Gain control for calibrating sources and applying correct gain structure 4.
OPERATING MANUAL AND USER GUIDE WALKTHROUGH—REAR PANEL Phantom +48V AC17V 2x1000mA 35W AC17V Phantom +48V 2x1000mA 35W AC Input AC Input Power P-P2: 7V~ P3-P2: 7V~ . Turn the Connect Mixer on or off 2. AC power supply receptacle CAUTION: USE THE POWER ADAPTER AUTHORISED BY Wharfedale Pro ONLY! 3.
OPERATING MANUAL AND USER GUIDE SPECIFICATIONS-502USB/802USB Model CONNECT 502USB CONNECT 802USB Main /4" Jack Balanced out +2dBu Main /4" Jack Balanced out +2dBu Maximum Balanced +/-dBu +/-dBu Output Level Headphones output 50mw +/-5mw @ Headphones output 50mw +/-5mw @ (%T.H.D. at kHz )
Page 19
CONNECT SERIES SPECIFICATIONS-1002USB/1202USB Model CONNECT 1002FX/USB CONNECT 1202FX/USB Main /4" Jack Balanced out +26dBu ± Main /4" Jack Balanced out +26dBu ± Maximum Output Level dBu, Unbalanced out +2dBu ±dBu dBu, Unbalanced out +2dBu ±dBu (%THD at kHz ) Headphones output 50mw±5mw @ Headphones output 50mw±5mw @ 32ohms 32ohms...