Car Select - Python 5206P Owner's Manual

Car Select

Car 2 must first be turned On (See Remote Control Configuration sec-
tion to turn on).
Press and hold the
1.
the LED and beeps once or twice to indicate the selected Car
is 1 or 2.
Release the button for Car Select.
2.
Release the
3.
and beeps continue to perform Car Select. Once the car is
selected a command can be performed by pressing one of the
command buttons.
© 2012 Directed. All rights reserved.
button for 3 seconds. The remote flashes
button, then press and release while the LED
37