Remote Beep; Car 2 - Python 5206P Owner's Manual

second lapse between buttons presses to prevent unintentional opera-
tions. If a button is pressed when locked the LED and a fault tone
play as an alert. The 1-way remote control only emits the fault tone if
equipped with speaker otherwise the 1-way remote control does not
respond with any button press.
To unlock the buttons, press the button followed by the button.

Remote Beep

Options: On, Off.
The 2-way and 1-way (if equipped with speaker) remote controls emit
a beep as a confirmation when a button on the remote is pressed and
the 2-way remote also gives a confirmation of a command response.
When set to OFF, beeps are not emitted for any operations except
when programming of the remote control. For systems with security,
beeps are only emitted for full trigger messages.

Car 2

Options: Off, On
The responder LE and 1-way remote controls can control two systems
independently. When set to OFF, the Car Select feature is not avail-
able. When set to On, the Car Select feature is enabled. See "Car
Select" (under Remote and System Operations) for details on using a
remote with 2 systems.
Page Mode
Options: Power Save 1, Power Save 2, On, Off
Paging is how the Responder LE remote monitors your system's mes-
sages. Power Save 1 extends the battery life by turning Paging Off
© 2012 Directed. All rights reserved. 21