Character Specifications (Tm-T88Iv); Paper Specifications (Tm-T88Iv) - Epson TM-T88IV Technical Reference Manual

Table 5-20 Print speed
Print control mode
Printing ladder bar codes
and 2D code
Bit image and Page mode
Two-color printing
lps: lines per second
*1: During printing (at 24 V, 28°C {82.4° F}, Print density Normal). Note, however, the print speed automatically
changes with the voltage applied to the printer and with the head temperature conditions.
Note:
The print speed sometimes slows down, depending on the data transfer speed and other settings.
A slow baud rate is a probable cause of intermittent printing. We recommend using a faster baud rate.

5.3 Character Specifications (TM-T88IV)

Table 5-21 Character specifications
Item
Character type
Character configuration
Character dimensions
Table 5-22 Character configurations and dimensions
Font A (12 × 24)
Font B (9 × 17)
Kanji font (24 × 24)
Notes: 1. Spaces between characters not included.
2. Characters can be scaled up to 64 times as large as the standard size.

5.4 Paper Specifications (TM-T88IV)

See Appendix B.
Rev. A
Unit Setting
mm/sec High-speed mode: Line space setting:
4.23 mm {1/6"}
mm/sec Low-speed mode: Line space setting:
4.23 mm {1/6"}
mm/sec Low-speed mode: Line space setting:
4.23 mm {1/6"}
mm/sec High-speed mode: Line space setting:
4.23 mm {1/6"}
Specifications
Alphanumeric 95 character sets
International 37 types
Extended graphics 128 characters × 11 pages (including 1 blank page)
See table titled "Character configurations and dimensions," below.
(Default is font A.)
See "Character configurations and dimensions," below.
(Spaces between characters not included.)
Standard Double-height Double-width
W × H (mm) W × H (mm)
1.41 × 3.39 1.41 × 6.77
0.99 × 2.40 0.99 × 4.80
3.39 × 3.39 3.39 × 6.77
TM-T88IV Technical Reference Guide
Print speed
(approx.)
100mm/s {2.4"/s}
60mm/s {2.4"/s}
60mm/s {2.4"/s}
100mm/s {1.65"/s}
Double-width /
Double-height
W × H (mm) W × H (mm)
2.82 × 3.39 2.82 × 6.77
1.98 × 2.40 1.98 × 4.80
6.77 × 3.39 6.77 × 6.77
Product Specifications 5-3