Emc And Safety Standards Applied - Epson TM-T88IV Technical Reference Manual

Cautions
CAUTION:
❏ Be sure to set this equipment on a firm, stable horizontal surface. Product may break
or cause injury if it falls.
❏ Do not use in locations subject to high humidity or dust levels. Excessive humidity and
dust may cause equipment damage, fire or shock.
❏ Do not place heavy objects on top of this equipment. Never stand or lean on this
equipment. Equipment may fall or collapse, causing breakage and possible injury.
❏ To ensure safety, unplug this equipment prior to leaving it unused for an extended
period.
❏ Parts on the circuit board may become hot during operation. Wait approximately 10
minutes after turning the power off before touching them.
❏ To avoid injury, take care not to insert fingers or any part of the hand in the roll paper
opening where the manual cutter is installed.
❏ Do not open the roll paper cover without taking the necessary precautions, as this
can result in injury from the autocutter fixed blade.
❏ When using compressed air products; such as air dusters, for cleaning during repair
and maintenance, the use of such products containing flammable gas isprohibited.
Modular Connectors
The printer uses the modular connectors specifically designed for the cash drawer. Do not
connect these connectors to an ordinary telephone line.

EMC and Safety Standards Applied

Product Name:
Model Name:
The following standards are applied only to the printers that are so labeled. (EMC is tested using
the Epson power supplies.)
Europe:
North America: EMI:
Japan: EMC:
iv
TM-T88IV
M129H
CE marking
Safety: EN 60950
FCC/ICES-003 Class A
Safety: UL 1950/CSA C22.2 No. 950
VCCI Class A
Rev. A