Table of Contents
Advertisement
6
Using Your Remote Transmitter (cont.)
Using Valet Mode
If the Passive Arming feature is enabled on your system, Valet mode
temporarily prevents the alarm system from arming automatically.
This is useful when fueling or servicing your vehicle.
To enter Valet Mode:
With the vehicle ignition key in the ON position, press the LOCK and
UNLOCK buttons simultaneously. The blue dashboard warning light
(status indicator) will turn on for one second, then turn off. This
indicates that the system is in Valet mode. Once the ignition is turned
off, the status indicator will emit a quick double-flash pattern.
Note: In Valet mode, all keyless entry, convenience features operate
normally.
To exit Valet Mode:
With the vehicle ignition key in the ON position, press the LOCK and
UNLOCK buttons simultaneously. The blue dashboard warning light
(status indicator) will turn on for one second, then turn off. This
indicates that the system has exited Valet mode.
Automatic Convenience Options
The Code Alarm CA-130
enhance security and comfort. Some of these features are
programmable at the time of installation. Please see your installer for
further details.
Illuminated Entry
When the alarm system is disarmed, the vehicle courtesy lights will turn
on for 1 minute, or until the vehicle is started or the system is re-armed.
Illuminated Exit
When removing the key from the ignition, the vehicle courtesy lights
will turn on for 1 minute, or until the system is armed.
Automatic Arming
The Code Alarm CA-130
key is removed from the ignition. This feature can be temporarily
disabled by placing the system into Valet mode.
Ignition Lock
If all doors are closed and the vehicle is started with the key, the doors
will automatically lock.
Ignition Unlock
When turningthe ignition key off, the doors will automatically unlock.When
CA 130 owners rev 7-04.pmd
TM
performs a variety of automatic functions to
TM
will arm automatically 1 minute after the
6
7/28/2004, 3:34 PM
Advertisement
Table of Contents
