IDEAL MINI C24 User Manual
Ideal industries boiler user manual
Hide thumbs
Also See for MINI C24:
- Installation and servicing (64 pages) ,
- Installation manual (9 pages) ,
- User manual (4 pages)
Advertisement
back
users guide
mini
Your Ideal users guide
See reverse for mini installation and servicing guide
C24/C28/C32
S24/S28
When replacing any part of this appliance, use only spare parts that you can be
assured conform to safety and performance specification that we require. Do not use
reconditioned or copy parts that have not been clearly authorised by Ideal Boilers
Advertisement
Related Manuals for IDEAL MINI C24
Summary of Contents for IDEAL MINI C24
- Page 1 back users guide mini Your Ideal users guide See reverse for mini installation and servicing guide C24/C28/C32 S24/S28 When replacing any part of this appliance, use only spare parts that you can be assured conform to safety and performance specification that we require. Do not use reconditioned or copy parts that have not been clearly authorised by Ideal Boilers...
-
Page 2: Boiler Controls
Mini are wall mounted, room sealed, non condensing boilers featuring full sequence automatic spark ignition and fan assisted combustion. Mini C24, Mini C28 and Mini C32 are low water content combination gas boilers. Mini S24 and Mini S28 are low water content system gas boilers. -
Page 3: Control Of Ch/Dhw Temperature
3 If necessary, empty the water circuits. FROST PROTECTION Mini C24, Mini C28 and Mini C32 appliances are provided with a built in anti ---freeze system that operates the boiler when the temperature is below 4 ° C... -
Page 4: Troubleshooting
The nature of all combination boilers is to heat up water directly from the incoming mains water supply directly through the boiler to supply domestic hot water at the stated flow rates, (as shown in the boiler installation instructions), to achieve a 35°C temperature rise. As the ambient temperature of the cold main varies during the summer and winter months it is likely in the colder winter months that the flow rate will need to be reduced at the outlet taps to achieve the same temperatures achieved in the warmer summer months.