Advertisement
Power the Antenna
1. Connect the other end of 12-ft coax cable from the antenna
to the power injector's ANT terminal. To prevent rain
water dripping down the coax cable and damaging indoor
electronics, create a "drip loop," shown below, before the
cable enters the house.
Power Injector's
ANT Terminal
2. Connect the power injector's pre-attached coaxial cable to
the Antenna In jack on your TV, receiver, or set top box.
3. Insert the AC adapter's small barrel plug into the power
injector's DC 12V jack, and plug the AC adapter into a
standard AC outlet.
TV with ATSC
HDTV tuner
n
Note: Always connect the AC adapter to the antenna
before you connect it to AC power.
Wall
TV with ATSC
HDTV tuner
Indoor
AC adapter
Power
injector
Indoor
Supplied Coax Cable
Drip Loop
AC adapter
Indoor
AC adapter
Power Injector's
TV with ATSC
Coaxial Cable
HDTV tuner
To TV
Power
injector
Outdoor
DC 12V jack
4
Power
injector
Outdoor
Outdoor
Advertisement
