Pentax K-5 II Operating Manual page 221

When pictures are taken with this camera held vertically, the vertical
position sensor activates and rotation information is added to the image to
enable playback with the correct image orientation. You can change the
rotation information and save the image using the following procedure.
• When [23. Saving Rotation Info] in the [C Custom Setting 4] menu is set to
[Off], the image rotation information is not saved when shooting.
• When [Auto Image Rotation] (p.21 0) in the [lB Playback 1] menu is set to
~
(On), an image with rotation information is automatically rotated during
playback.
• You cannot change the image rotation information in the following conditions.
- when the image is protected
- when the image rotation information tag is not saved with the image
- when [Auto Image Rotation] (p.210) in the [lB Playback 1] menu is set to
D
(Off)
• Movie files cannot be rotated.
1
Select the image you want to rotate in Playback mode.
2
Press the four-way controller (
'Y ).
The playback mode palette appears.
3
Use the four-way controller ( • ..-
<1111
~
)
to select
0
(Image
Rotation) and press the
OK
button.
The selected image is rotated in goo increments and the four thumbnail
images are displayed.
4
Use the four-way controller
( • T ...._
~)
to select a desired
rotation direction and press the
OK
button.
The image rotation information is saved.
'"tJ
Dr
'<
C"
D)
n
~
.,
c
::s
n ....
c:r
::s
(/)