Pentax K-5 II Operating Manual page 104

en
::l"'
0
0
~
:::s
tC
"T1
c:
:::s
(")
~
0
:::s
tn
• The aperture value can be set in increments of 1/3 EV or 1/2 EV. Set the
exposure steps in [1. EV Steps] of the [C Custom Setting 1] menu. (p.1 06)
• Use a sturdy tripod and the cable switch CS-205 (optional) or Remote Control
(optional) to prevent camera shake when using
B
mode. Connect the cable
switch to the cable release terminal (p.20).
• When using the remote control, set whether to start exposure with a press
and stop it with another press of the shutter release button on the remote
control, or to keep the shutter open as long as the release button on the
remote control is kept pressed. Set in [19. Remote Control in Bulb] of the
[C
Custom Setting 3] menu.
• The sensitivity cannot be set to [ISO AUTO] in
B
mode. If the exposure mode
is changed to
B
mode when the sensitivity is set to [ISO AUTO], the
sensitivity is also changed to the lowest value set in "Setting the Range of
Automatic Sensitivity Correction" (p.84 ).
• There is no limit on exposure time for Bulb shooting. However, we
recommend the use of the AC adapter kit (optional) when shooting with a
long exposure setting as the battery is being drained while the shutter
remains open. (p.52)
Using the
X
Mode
The shutter speed is locked at 1/180 second. Use this when using an
external flash that does not automatically set the sync speed.
1
Set the mode dial to
X.
JPEG
m!l
[ 311