Recording Settings (Recording) - Sony RDR-HX730 Operating Instructions Manual

Recording Settings
(Recording)
The "Recording" setup allows you to adjust
recording settings.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Recording," and press
ENTER.
The "Recording" setup appears with the
following options. The default settings
are underlined.
HDD Rec. Settings
HQ Setting
Selects the HQ mode used for recording on
the HDD (page 41).
HQ+
Records in higher quality
(approximate 15 Mbps).
HQ Records in the standard HQ
mode.
Timer Settings
Rec Mode Adjust
On Automatically adjusts the
recording mode to enable the
entire program to be
recorded (page 43).
Off Turns off the function.
Auto Title Erase (HDD only)
On Automatically erases old
titles recorded on the HDD
(page 43).
Off
Turns off the function.
Synchro Rec
Selects the recording destination used for
Synchro-Recording (page 50).
Record to Records to the HDD.
HDD
Record to Records to DVDs.
DVD
Auto Chapter
Selects whether to automatically divide a
recording (a title) into chapters during
recording or dubbing.
On
Inserts chapter marks at
approximately 6 minute
intervals.
Off No chapter mark is inserted.
b
Notes
• The actual chapter mark interval may vary
depending on the amount of information
contained in the video to be recorded.
• Chapter marks are automatically inserted where
the recordings start on the tape when "Auto
Chapter" is set to "On" during DV/Digital8
dubbing to the HDD or a DVD-RW/DVD-R (VR
mode).
87