Control Features
About the controls with temperature settings.
Note: The refrigerator is shipped with protective fi lm covering the temperature controls. If this fi lm was not
removed during installation, remove it now.
The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for the
freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.
The temperature controls can display both the S
temperature as well as the actual temperature in the
ET
refrigerator and freezer. The actual temperature may vary slightly from the S
temperature based on usage
ET
and operating environment.
Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments, but
does not shut off electrical power to the refrigerator.
To turn the cooling system off, tap the refrigerator W
touch pad until the temperature display fl ashes
ARMER
and beeps. Then tap the freezer W
touch pad until the display indicates OFF and beeping stops.
ARMER
To turn the cooling system on, tap the refrigerator C
touch pad twice. The display will also show the
OLDER
refrigerator and freezer temperature settings.
(Continued next page)
– 9 –