System Maintenance; Your Systems Programmable Operating Characteristics; Changing The Shock Sensor (It-S) Settings - Ford Vehicle Security System Owner's Manual

System Operation (Con't)
The system is returned to its normal operating mode, turn the ignition key to the
ON or RUN position and back to the OFF or LOCK position three times within 10
seconds. The status indicator will shut off, indicating that the system is in now in its
normal operating mode.

System Maintenance

Your Systems Programmable Operating Characteristics:

Your PowerCode system has several programmable settings such as Ignition
triggered door lock, Ignition triggered door unlock and automatic arming features
which can be changed to tailor your systems operation to your own personal desires
and/or requirements. If you are interested in changing any of these settings, call
1-800-FORD-KEY for information regarding the different programmable features and
the steps to change the settings.

Changing the Shock Sensor (IT-s) settings:

Your PowerCode systems IT-s sensitivity settings can be tailored to your individual
requirements. Your installer at the time of installation has set your IT-s to a medium
sensitivity. To make your systems IT-s either more or less sensitive, follow these
steps:
1. Roll down the drivers door window.
2. Open the driver's door.
3. Turn vehicle ignition on.
4. Press and hold programming/override button under the instrument panel.
After 15 seconds, the horn will chirp three (3) times.
5. Immediately release, press and release the programming/override button.
The system will respond by chirping horn four (4) times.
6. Press the Interior door mounted lock switch one time
The system will respond by chirping the horn one time.
7. Close all doors.
Your "Lite-touch" sensitivity can now be increased by pressing the UNLOCK
switch or decreased by pressing the LOCK button. The system will chirp the horn
one time each time either button is pressed.
8. Open the driver's door.
9. Press the Interior door mounted lock switch one time
The system will respond by chirping the horn two times.
10. Close all doors.
Your "Full-shock" sensitivity can now be increased by pressing the UNLOCK
switch or decreased by pressing the LOCK switch. The system will chirp the horn
one time each time either button is pressed.
11. Turn the ignition key off to exit programming mode and save settings.
After changing your shock sensor settings, it is recommended that you arm your
security system and double check your settings. A setting to high can cause the
system to "false alarm". Conversely, a setting to low could prevent the system from
adequately protecting your vehicle.
6