Related Manuals for Ford Perimeter Plus
Summary of Contents for Ford Perimeter Plus
- Page 1 Perimeter Plus Vehicle Security and Remote Start Systems Owner’s Manual 4280760 Rev P6 04/17 4280760 Phase 2 VSS_RMST Owners Guide_P6.indd 1 4280760 Phase 2 VSS_RMST Owners Guide_P6.indd 1 4/27/2017 9:41:21 AM 4/27/2017 9:41:21 AM...
-
Page 2: Table Of Contents
Contents Welcome ....................3 Perimeter Plus Vehicle Security (optional) ........4 Arming the Security System ..............4 Disarming the Security System ............... 4 When the Security System is Armed ............5 Security LED Indicator (optional)............. 5 Shock / Impact Sensor (optional) ............5 Starter Interrupt (optional) ............... -
Page 3: Welcome
Your system, purchased today, is ready to accept tomorrow’s advancements in technology. The Ford Motor Company vehicle security and remote start system is a scalable product that can be confi gured based on personal preference and vehicle model. All features contained in this manual may not have been installed at time of purchase. -
Page 4: Perimeter Plus Vehicle Security (Optional)
Using your factory supplied Remote Keyless Entry (RKE) keyfob is the primary method of arming and disarming your Perimeter Plus security system. The system is armed when the doors are locked with the RKE keyfob. The system is disarmed when the doors are unlocked with the RKE keyfob. -
Page 5: When The Security System Is Armed
Perimeter Plus Vehicle Security (optional) When the Security System is Armed: •All interior entry points are monitored for unauthorized entry (Note: depending on trim level, the vehicle’s hood or trunk / liftgate may not be monitored); •The shock sensor (optional) monitors for impact to the vehicle’s body or glass;... -
Page 6: Shock Sensor Disable
Perimeter Plus Vehicle Security (optional) Shock Sensor Disable: The security system has the ability to ignore the optional shock sensor while armed. This feature is useful for events that may jar your vehicle, but pose no threat, such as a loud thunder storm or heavy construction traffi c passing near your parked vehicle. -
Page 7: Basic Remote Start Feature (Optional)
Basic Remote Start Feature (optional) Remote Keyless Entry Transmitter To Activate Remote Start: To Shutdown Remote Start: 1. Press 1. Press 2. Press within 3 seconds 2. Press within 3 seconds 3. Press within 3 seconds 3. Press within 3 seconds Transmitter image for reference only. -
Page 8: Long-Range 1-Way And 2-Way Remote Start System (Optional)
Long-Range 1-Way and 2-Way Remote Start System (optional) 1-Way Transmitter 2-Way Transmitter Press two times to Press to initiate activate Remote Start. Car Find. Press and Press and hold** hold** to initiate Panic manually shut down the Remote Start. Starting Your Vehicle with the 1-Way Transmitter: The remote start function is activated by pressing the button two times* within 3 seconds on the 1-way remote control transmitter. -
Page 9: 2-Way Transmitter Feedback Indicators
Long-Range 1-Way and 2-Way Remote Start System (optional) 2-Way Transmitter Feedback Indicators: Transmitter Indicators Remote Start Status 1 Beep/LED Flash Vehicle has received an Initiate Start Command. 2 Beeps/LED Flashes Vehicle has started. Steady LED Flash Vehicle is running. 3 Beeps/LED Flashes Vehicle has shut down, either by pressing and holding** the button or completing the run cycle (Transmitter must be in range of the vehicle). -
Page 10: Remote Start Operation (Optional)
Remote Start Operation (optional) Entering the Vehicle While it is Running via Remote Start: Enter the vehicle with the Integrated Keyhead transmitter. Insert the key into the ignition and turn to the ON position. Once a programmed vehicle key has been recognized, the remote start session will stop and the vehicle will operate normally. -
Page 11: Remote Start System Maintenance
Remote Start System Maintenance Changing the Remote Control Transmitter Battery (Long-Range 1-Way and 2-Way Remote Start System): The (CR-2032 for 1-way transmitter and CR-2450 for 2-way transmitter) 3-volt lithium battery supplied in your remote control should last approximately one year, depending on usage. -
Page 12: User Selectable Options
User Selectable Remote Start Options Optional Activation Method (Long Range 1-Way & 2-Way Remote Start Systems): The Remote Start System comes pre-programmed to start the vehicle when the button on the remote control transmitter is pressed 2 times. The Remote Start System may be programmed instead to activate by pressing and holding** the button on the remote control transmitter for more than 2.5 seconds by following these... -
Page 13: Warranty Information
¤ the remainder of your new vehicle limited warranty This means that a Ford Vehicle Remote Start System purchased along with your new vehicle are covered for up to the length of the Ford or Lincoln new vehicle limited warranty.