Information On The Display Panel - Bosch WAY32540AU Instruction Manual And Installation Instructions

Information on the display panel

Display
²»¾Â´ ³¾¾Á
»¾ËÆ Æ°Ã´Á
¿Á´ÂÂÄÁ´ ¾¿´½
̡¿Ä¼¿ ¸Â ±»¾²º´³
²»´°½ ¿Ä¼¿
³¾¾Á ¸Â »¾²º´³
...
»¾²º¸½¶
...
Ľ»¾²º¸½¶
:
´ ÌÍ
Error : XXX
´
38
Cause/Remedy
– Washing may be caught. Please open and close washing
machine door again and select Start/Reload
– If required, shut washing machine door or remove washing and
shut again.
– If required, switch appliance off and on again; set programme
and make individual settings; start programme.
– Turn on tap fully.
– Supply hose kinked/jammed.
– Water pressure too low. Clean the filter.
– Drain pump blocked. Clean the drain pump. ~ Page 34
– The water drainage pipe/drain hose is blocked. Clean the
drainage hose on the siphon. ~ Page 35
Water level or temperature is too high.
Select Start/Reload
If the Start/Reload
A
(e.g. repeatedly reloading items of washing), the door lock may
overheat. Wait for the door lock to lock or unlock.
not applicable without AquaStop
Water in the base pan, appliance leaking.
Call customer service! ~ Page 41
Switch off appliance, wait 5 seconds and switch on again. If the
display is indicated again, call customer service. ~ Page 41
to continue the programme.
A
button is pressed too frequently
.
A