Table of Contents
Advertisement
3.
4.
Note: Residual water may run out.
5.
6.
7.
²
To prevent unused detergent from flowing into the outlet during
the next wash: Pour 1 litre of water into dispenser II and start the
Drain programme.
Drainage hose on the siphon blocked
1.
Note: Residual water may run out!
2.
3.
4.
Take the drainage hose out of the holder.
Remove sealing cap, allow detergent solution to flow out.
Have a suitable container ready.
Push up the closing cap and place the drain hose back in its
holder.
Carefully unscrew the pump cover. Clean the interior, pump
cover thread and pump housing (fan impeller in the
detergent-solution pump must rotate).
Reinsert and screw on pump cover. Handle should be
vertical.
Close the service flap. If required, lock disengaged service
flap beforehand.
Switch off the appliance. Pull out the mains plug!
Loosen hose clip, carefully remove drainage hose.
Clean drainage hose and siphon spigot.
Re-attach drainage hose and secure connection point with
hose clip.
35
Hide quick links:
Advertisement
Table of Contents
