6400-Lu3-Dse-Local Sna 3174 Control Unit - IBM 6400 Operation Manual

6400-LU3-DSE-Local SNA 3174 Control Unit

LU3-DSE mode is utilized when no host
printing controls are required to accomplish
the print function desired. The printer
settings will be used and cannot be
overridden by the host system. An existing
local 3174 SNA-connected control unit is
assumed. The steps required to install an
LU3-DSE printer for host definitions are as
follows:
1. Define to VTAM by adding logmode
entry to VTAM Logmode Table
2. Define to JES2 (Not required but
recommended. See details below)
3. Define to CICS or another Application
Program such as VPS or JES328X
products.
4. Select the options on the printer that
are appropriate for the environment.
Step 1 – VTAM Definition
The following should be added to the Local
Major Node VTAM definition.
LOC3174 VBUILD
LOCPU74 PU
LOC64XX LU
The following entry should be placed in the
VTAM MODE TABLE specified above or
another of your choice.
64XXDSEL MODEENT LOGMODE=64XXDSEL,
Multi–Platform Interface Feature Operation Guide
TYPE=LOCAL
CUADDR=nnn...
LOCADDR=n,MODETAB=MYMODETB,
DLOGMODE=64XXDSEL,ISTATUS=ACTIVE
FMPROF=X'03',TSPROF=X'03',PRIPROT=X'B1'
SECPROT=X'20',COMPROT=X'3080',RUSIZES=X'C7C7,
PSERVIC=X'038000000000185018507F00',
PSNDPAC=X'00',SRCVPAC=X'00',SSNDPAC=X'00'
63