IBM 1454 Setup Manual page 17

b
a
c
Warning:
Do not touch the image
transfer unit belt with your fingers.
b
a
3
Remove the print cartridges. For each cartridge:
a
Pull up on the handhold.
b
Pull the cartridge straight out and use the handle to lift it off the guides.
c
Set the cartridge on a firm, flat, clean surface in the upright position.
4
Remove the packing material from the image transfer unit belt:
a
Grasp the detensioner located on the right side on the inside of the machine.
b
Gently but firmly pull up on the detensioner and the attached sheet, then
remove both items from the printer.
Detensioner
5
Reinstall the print cartridges. For each cartridge:
a
Turn the cartridge over so the handle is on the bottom.
b
Remove the red plastic packing material from the photoconductor drum.
Discard the packing material.
Set up the print supplies
17