Installing A 500-Sheet Drawer - IBM 1454 Setup Manual

Installing a 500-sheet
drawer
Warning:
If you have an optional
duplex unit and a 2000-sheet drawer, you
must install a 500-sheet drawer between
the duplex unit and the 2000-sheet
drawer.
Your printer supports up to three additional 500-sheet drawers. However, if you install a
2000-sheet drawer, you can only add one additional 500-sheet drawer.
1
Unpack the 500-sheet drawer and remove any packing material.
2
Place the drawer in the location you have chosen for your printer or install it on
another drawer:
a
Align the holes in the 500-sheet drawer with the positioning posts on the
lower drawer.
b
Lower the 500-sheet drawer into place. Make sure it is seated securely on
the other drawer.
3
If you are installing a 500-sheet drawer on top of a 2000-sheet drawer, secure
them with stabilizing screws.
a
Insert the screws through the holes next to the positioning posts on the
500-sheet drawer.
b
Hand-tighten the screws.
Even when fully inserted, the screws allow some space between the
drawers.
4
Install another 500-sheet drawer, or continue with "Installing a duplex unit" on
page 13 or "Positioning the printer" on page 13.
Set up the printer and paper handling options
12