Table of Contents
Advertisement
primary harness (H1), 12-pin connector
primary harness wiring diagram
______
H1/1
______
H1/2
______
H1/3
______
H1/4
______
H1/5
______
H1/6
______
H1/7
______
H1/8
______
H1/9
______
H1/10
______
H1/11
______
H1/12
primary harness wiring guide
This guide describes in detail the connection of each wire. Also included are possible applications of each wire.
This system was designed with the ultimate in flexibility and security in mind. Many of the wires have more than
one possible function. Please read the instructions carefully to ensure a thorough understanding of this unit and
how it operates.
H1/1 ORANGE (-) GROUND-WHEN-ARMED OUTPUT
This wire supplies a (-) ground as long as the system is armed. This output ceases as soon as the system is dis-
armed. The orange wire is pre-wired to control the p/n 8618 starter kill relay. It can supply up to 500 mA of
current.
NOTE: If connecting the orange wire to control another module, such as a p/n 529T or p/n 530T
window module, a 1 amp diode (type 1N4004) will be required. (See the following diagram.)
IMPORTANT! Never interrupt any wire other than the starter wire.
© 2000 Directed Electronics, Inc. Vista, CA
ORANGE
WHITE
WHITE/BLUE
(-) 200 mA CHANNEL 3 PROGRAMMABLE OUTPUT
BLACK/WHITE
GREEN
BLUE
VIOLET
BLACK
YELLOW
BROWN
RED
RED/WHITE
(-) 500 mA ARMED OUTPUT
(+)/(-) SELECTABLE LIGHT FLASH OUTPUT
(-) 200 mA DOMELIGHT SUPERVISION OUTPUT
(-) DOOR TRIGGER INPUT, ZONE 3
(-) INSTANT TRIGGER INPUT, ZONE 1
(+) DOOR TRIGGER INPUT, ZONE 3
(-) CHASSIS GROUND INPUT
(+) SWITCHED IGNITION INPUT, ZONE 5
(+) CONSTANT POWER INPUT
(-) 200 mA CHANNEL 2 OUTPUT
(+) SIREN OUTPUT
3
Hide quick links:
Advertisement
Table of Contents
