Table of Contents
Advertisement
arming/disarming diagnostics
The systems microprocessor monitors and reports all active and violated zones when
arming and disarming the system.
arming
Zones that are triggered at the time the system is armed are reported by an addition-
al set of status chirps called Malfunction AutoBypass. The specific zone bypassed is
then reported by the LED. For more zone information, refer to Table of Zones section
of this guide.
disarming
If a zone is triggered, three disarm chirps will sound. The specific zone that was trig-
gered is then reported by the LED when the ignition is turned on. For more zone infor-
mation, refer to the Table of Zones section of this guide.
23
© 2004 directed electronics, inc.
Hide quick links:
Advertisement
Table of Contents
