Table of Contents
Advertisement
arming/disarming diagnostics
The systems microprocessor monitors and reports all active and violated zones when
arming and disarming the system.
arming
Zones that are triggered at the time the system is armed are reported by an addition-
al set of status chirps called Malfunction AutoBypass. The specific zone bypassed is
then reported by the LED. For more zone information, refer to Table of Zones section
of this guide.
disarming
If a zone is triggered, three disarm chirps will sound. The specific zone that was trig-
gered is then reported by the LED when the ignition is turned on. For more zone infor-
mation, refer to the Table of Zones section of this guide.
system status chirps
Action
No. of Chirps
Arm
2
Arm
4
Arm
2 (5-second pause) 4
Arm
2 (10-second pause) 4
Disarm
1
Disarm
3
20
Description
System armed.
System armed with hood or
trunk bypass zones 5 and 6.
System armed with door bypass zone 4
System armed with sensor active
and bypassed zones 1, 3, and 8.
System disarmed.
System disarmed with zone violation
www.directed.com
Advertisement
Table of Contents
