Auto-Immobilization Feature; Auto-Immobilization Sequence; One-Time Valet Feature; Blackjax Feature - Clifford intelliGuard 750 Installation Manual

Car security
Table of Contents

Advertisement

auto-immobilization feature

Immobilizer circuits automatically activate after 30 seconds.
N N O O T T E E : : H1/17 orange ground when armed will not activate during Auto-
Immobilization.

auto-immobilization sequence

1.
Turn ignition off or disarm alarm.
2.
After 30 seconds the systems Immobilization circuits activate and engage the
starter and ignition interrupt.
3.
LED blinks at ½ normal speed.
Disarm the system when immobilized
Use one of the following methods to turn off auto-immobilization.
Turn ignition on and press the arm/disarm button of the transmitter.
Arm the alarm and then disarm the alarm.
Turn the ignition on and enter the system valet/PIN code.

one-time valet feature

This feature allows the system to be put in valet mode only until the next time the
ignition is turned off.
ON: Valet mode will be exited every time the ignition is turned on.
OFF: Valet mode will only be exited by using the valet switch or the remote control.

blackjax feature

blackjax activation sequence

When BlackJax is programmed ON, BlackJax sequence will begin every time the igni-
tion is turned on and must be turned off by entering your PIN code. It will then acti-
vate again while driving when triggered as described below.
N N O O T T E E : : BlackJax can be turned off by entering PIN code at any time.
40
www.directed.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents