RESTORING THE ORIGINAL PRESET SET-
TINGS
Is it possible to cancel all modifications made to
the Presets and restore factory settings.
1. Press RESTORE in the SYSTEM section.
The RESTORE ORIGINAL BLOCK display
activates.
2. Press F7 or F8 to select the PRESET command.
The display shows "Restore Original Preset".
3. Press ENTER to confirm the Restore Preset pro-
cedure, or ESCAPE to cancel.
All the changes stored to the Presets of the
PROGRAMMABLE PRESETS section are
cancelled. The original ROM settings of all
the Preset parameters are restored.
Hint: If you want to cancel the entire contents of
RAM in a single operation, use the "Restore ALL"
command. Be sure, however, to save all data that
you wish to conserve to disk before confirming the
operation.
1
RESTORE
2
1/1 RESTORE ORIGINAL BLOCK
All
Seq
Preset
F1
F2
F3
F4
F5
RESTORE ORIGINAL " PRESET "
Are you sure? Press [ENT] or [ESC]
3
ENTER
Sounds & Presets 4•23
Restore Preset
[Release]
[01-09-97]
F6
F7
F8
ESCAPE