Baldwin Piano & Organ Company Pianovelle PS1500 Owner's Manual page 62

Data Entry
MODIFYING THE PARAMETER VALUES
The value or status of a selected parameter can
be changed with the Dial. For On/Off situations,
the corresponding Function button toggles be-
tween the two states. In many situations, the Slid-
ers F1...F8 can be used to change parameter
values without having to select the parameter
beforehand. In Edit situations, the bottom LED
indicator of the Sliders F1...F8 turns on to shows
that the Sliders are enabled as Data Entry devic-
es.
Modifying parameters with the DIAL
Change the values of the selected parameter by
rotating the DIAL. In normal playing conditions,
the DIAL is active for real time Tempo changes,
while in Edit situations, it enters data continually:
clockwise rotation increases while counter-clock-
wise rotation decreases.
Modifying On/Off parameters with the Function
button
If the parameter is an On/Off function, toggle
between the two states with the corresponding
Function button after selecting the parameter.
For example, the Local Off parameter setting of
the tracks in the page shown opposite can be
toggled between ON and OFF by pressing the
corresponding Function button repeatedly.
Modifying parameters with the Sliders
In most Edit situations, the Sliders F1...F8 acti-
vate as data entry devices for the parameters that
correspond to the function buttons F1...F8.
In such cases, the Sliders intervene directly on
the corresponding parameter without having to
select the parameter beforehand.
3•14 User Guide
1/2 MIDI CHANNEL: [CHANNEL]
10 02 03 04 05
MIDI: MIDI Channel page. Assign a different MIDI channel to
the selected track using the DIAL.
4/5 GENERAL: [PEDAL 1]
P1=Soft P2=Sosten
Edit General Pedal page: Pedal 1 functions selected with the
Dial
1/1 MIDI:SECTION LOCAL (On/Off)
On On On On On
F1 F2 F3 F4 F5
MIDI: Section Local Off page
showing On/Off parameters
2/2 MIXER:PAN
C=00 C=00 C=00 Mute L=24 C=00 R=31 C=00
ACCOMPANIMENT
DRUMS BASS ACCOMP.1 ACCOMP.2
F1 F2 F3 F4
MIXER: Pan page. Use the sliders to change the pan settings
without selecting the corresponding parameter
[Tk08]
06 07 08
P3=Damper
[Tk08]
On On On
F6 F7 F8
ON
Off
[Tk08]
ACCOMP. 3 LOWER UPPER 2 UPPER 1
MAX
MIN
F5 F6 F7 F8