Baldwin Piano & Organ Company Pianovelle PS1500 Owner's Manual page 82

Transposing Tracks
TRANSPOSING THE TRACKS (BY
SEMITONES)
The Preset tracks can be individually transposed
in semitone steps using the "Section Transposer"
function in «Edit Preset».
The range over which a section can be trans-
posed is 24 semitones (2 octaves) and the set-
tings can be stored to the Preset.
1. Press PRESET in the EDIT section.
2. Press PAGE+/BANK+ to enter the SECTION
TRANSPOSER on page 2.
3. Select the track that requires transposing using
the Function buttons.
4. Rotate the Dial to set the required transposition
(+ value = transpose UP, - value = trans-
pose DOWN).
Instead of using the DIAL, you can change
the track transpose setting by means of the
corresponding sliders (F1...F8). The bottom
LED of the sliders turns on to indicate that
they are enabled as data entry controls. If
you use the sliders, it is not necessary to se-
lect the tracks first.
5. Escape «Edit Preset» by pressing ESCAPE.
To save the transposition settings, save the Pre-
set using STORE PRESET.
4•18 User Guide
1/2
PRESET
3
2/9 PRESET:TRANSPOSER
00 00 00 00 00
F1 F2 F3 F4 F5
4
OR
ACCOMPANIMENT
DRUMS BASS ACCOMP.1 ACCOMP.2 ACCOMP. 3
F1 F2 F3 F4 F5
5
ENTER ESCAPE
PAGE+ / BANK+
PAGE– / BANK–
[Tk07]
00 +04 00
F6 F7 F8
LOWER UPPER 2 UPPER 1
MAX
MIN
F6 F7 F8