Selecting Single Sounds 4 - Baldwin Piano & Organ Company Pianovelle PS1500 Owner's Manual

Selecting Single Sounds
To assign a Sound to a keyboard track (Upper 1,
Upper 2 or Lower) in Style/Preset mode, you must
first select the track with the SELECT buttons
(Upper 2, Upper 1; Lower) located to the right of
the display. The SELECT buttons enable the dis-
played keyboard tracks for a Sound change. A
selected track is shown flashing and only one
section at a time can be in an enabled state. A
selected track (flashing) is not necessarily active
for play.
To assign a Sound to any track, including one
not displayed and regardless of the current mode,
you must first enter Edit Preset mode (press the
Preset button) to enter the ProgramChange page.
The procedure is explained in detail on page 11.
Assign a Sound to a keyboard track
1. Press one of the SELECT buttons.
A Press UPPER 2 to select the Upper 2 key-
board track;
B Press UPPER 1 to select the Upper 1 key-
board track;
C Press UPPER 1 + UPPER 2 together to
select the LOWER keyboard track.
2. Press a SOUND GROUPS button.
The display shows a bank of 8 Sounds be-
longing to the selected Group. The current
Sound Bank is shown in the top left hand
corner of the display.
Selecting Single Sounds
1
UPPER 2
A
S
E
L d ***********
LOWER
E
C
T Bk1: SLOSTR
T
UPPER 1
UPPER 2
B
S
E
d ***********
L
d ***********
LOWER
E
C
T Bk1: SLOSTR
T Bk1: SLOSTR
T
UPPER 1
UPPER 2 C
S
E
d ***********
L
LOWER
E
T Bk1: SLOSTR
C
T
UPPER 1
2
SOUND GROUPS
PIANO MALLET ORGAN GUITAR BASS
REED FLUTE SYN LEAD SYN PAD SYN SFX
Bk1 PIANO2 HONKY
PIANO1 PIANO3 EL.PN1
Sounds & Presets 4•3
Bk1: STRING
Bk1: PIANO1
Bk1: STRING
Bk1: STRING
Bk1: PIANO1
Bk1: PIANO1
Bk1: STRING
Bk1: PIANO1
STRINGS ENSEMBLE BRASS
ETHNIC PERCUSSIVE SFX
EL.PN2 CLAVIN
HARPSI