Baldwin Piano & Organ Company Pianovelle PS1500 Owner's Manual page 100

Modifying the Chord Recognition mode
MODIFYING THE CHORD RECOGNITION
MODES
The three chord recognition modes are accessed
by holding the PIANO STYLE button pressed for
approximately 2 seconds.
1. Press and hold PIANO STYLE.
2. Select the required chord recognition mode with
the corresponding Function buttons.
F1/F2 select ONE FINGER;
F2/F3 select FINGERED 1;
F3/F4 select FINGERED 2;
F7/F8 select FREESTYLE.
3. Press ESCAPE to close the PIANO STYLE display.
4. Press STORE PRESET and ENTER to save to the
current Preset.
The chord recognition modes are Preset pa-
rameters, therefore, the Programmable Pre-
sets can be independently programmed to
recall different chord recognition modes.
N.B.: The recognized chord symbols appear on
the main Style display. If an unrecognized chord is
played, the chord symbol for the lowest note
appears followed by a series of asterisks. For
example: "C*****".
N.B.: In order for the chord to be recognized
(and for its symbol to be shown on the display)
.EASY PLAY must be on.
5•12 User Guide
PIANO STYLE
1
1/1 PIANO STYLE:ONE FINGER
OneFinger Fingered1 Fingered2 FreeStyle
2
1/1 PIANO STYLE:FINGERED 2
OneFinger Fingered1 Fingered2 FreeStyle
F1 F2 F3 F4 F5
3
ENTER
STORE
4
PRESET
Preset Store:01GrandP
Are you sure? Press [ENT] or [ESC]
HARMONY
ON OFF TYPE
ENTER
F6 F7 F8
ESCAPE
TO:01GrandP
ESCAPE