Long Term Event History
The system stores the last six full triggers in memory. These are not erasable. Each time the unit sees
a full trigger, the oldest of the six triggers in memory will be replaced by the new trigger. To access
long term event history:
1.
With the ignition off, press and HOLD the Valet/Program button.
2.
Turn on the ignition.
3. Release the Valet/Program button.
4. Press and release the Valet/Program button within five seconds. The LED will
flash in groups indicating the last six zones that triggered the unit. The LED
will flash for one minute or until the ignition is turned off.
Note: The Warning Zone triggers are not stored in memory and will not be reported.
Optional Vehicle Recovery System (VRS
VRS
is an optional feature designed to disable a vehicle during a carjacking event. It must be
® ®
programmed in the features menu for it to work. For operational instructions when testing VRS
refer to the Owner's Guide.
Rapid Resume Logic
Rapid Resume Logic ensures that when the system is powered up it will return to the same state it
was in when power was disconnected. For a full description of Rapid Resume Logic refer to the
Owner's Guide.
2005
©
Directed Electronics, Inc. all rights reserved
®
)
® ®
47