Adjusting Adjustable Feet - Panasonic PT-RZ475U Operating Instructions Manual

Adjusting adjustable feet

Install the projector on a flat surface so that the front of the projector is parallel to the screen surface and the projection screen is rectangular.
If the screen is tilted downward, the projection screen can be adjusted to be rectangular by adjusting the adjustable feet. The adjustable feet
can also be used to adjust the projector to be level when it is tilted in a horizontal direction.
Extend the adjustable feet by rotating in the direction shown in the figure and retract by rotating in the opposite direction.
Attention
f Be careful not to block the intake/exhaust with your hands or any objects when adjusting the adjustable feet when the light source is on.
(x page 23)
f When there is trapezoidal distortion, execute the [POSITION] menu → [KEYSTONE].
Chapter 2 Getting Started — Setting up
Adjustable amount
Front adjustable feet: Approx. 12 mm (15/32")
ENGLISH - 29