Panasonic PT-RZ475U Operating Instructions Manual page 138

r Terminal
<COMPUTER IN> terminal
<DVI-I IN> terminal
<HDMI IN> terminal
<VIDEO IN> terminal
<SERIAL IN> terminal
<VARIABLE AUDIO OUT>
terminal
<AUDIO IN> terminal
<DIGITAL LINK/LAN> terminal
<3D SYNC> terminal
Note
f The model numbers of accessories and optional accessories are subject to change without notice.
138 - ENGLISH
Chapter 6 Appendix — Specifications
1 set, high-density D-Sub 15 p (female)
RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
VD
(SYNC/HD and VD do not support 3 value SYNC.)
YP P signal Y: 1.0 V [p-p] including synchronization signal, P
B R
1 set, DVI-I 29 p
Digital signal Single link, DVI 1.0 compliant, HDCP compatible
RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
VD
YP P signal Y: 1.0 V [p-p] including synchronization signal, P
B R
1 set, HDMI 19 pin, HDCP compatible, Deep Color compatible
Audio signal Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
1 set, Pin jack 1.0 V [p-p] 75 Ω
1 set, D-Sub 9 p (female), RS-232C compliant, for computer control
1 set, M3 stereo mini jack (monitor output, with stereo support) 0 V [rms] to 1.8 V [rms] (variable), output
impedance 2.2 kΩ or lower
1 set, M3 stereo mini jack 0.5 V [rms], input impedance 22 kΩ or higher
1 set, for RJ-45 network, DIGITAL LINK connection, PJLink compatible, 100Base-TX
1 set, Mini DIN 3 p, for 3D IR transmitter connection
Power outlet: 5 V/Maximum 500 mA, Stereo synchronization signal: 3.3 V/Maximum 10 mA
TTL high impedance, automatic positive/negative
polarity compatible
TTL high impedance, automatic positive/negative
polarity compatible
P : 0.7 V [p-p] 75 Ω
B R
TTL high impedance, automatic positive/negative
polarity compatible
TTL high impedance, automatic positive/negative
polarity compatible
P : 0.7 V [p-p] 75 Ω
B R