Url Blocking - Planet Networking & Communication WRT-414 User Manual

Note: You need to give your LAN PC clients a fixed/static IP address for the
Access Control rule to work properly.
Client PC Service You can block the clients from accessing some Internet services by checking
the services you want to block.
Protocol This allows you to select UDP, TCP or Both protocol types.
Port Range You can assign up to five port ranges. The router will block clients from
accessing Internet services that use these ports.
Add Click "Add" to save the settings.
Reset Click "Reset" to clear all fields.
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are save successfully. You may press "Continue" for configure other
settings or "Apply" to restart WRT-414 with new configuration.
5.7.2

URL Blocking

You can block users to access to some web sites by entering a full URL address or just keyword of the
web site.
Parameters Description
Enable URL Blocking Enable/disable URL Blocking.
Add URL / Keyword Fill in "URL / Keyword" and then click "Add". You can enter the full URL
address or the keyword of the web site you want to block. If you find any typo
before adding it and want to retype again, just click "Reset" and the field will
- 55 -