Chapter 4 Quick Setup; Time Zone - Planet Networking & Communication WRT-414 User Manual

This section describes the basic configuration of the WRT-414 and allows you to connect to Internet
easily.

4.1 Time Zone

The time information is used for Log entries and Firewall settings. You can keep the default Time
Server address or set a new IP address for your router to synchronize its time. Click "Next" to continue.
Parameter
Set Time Zone
Time Server Address
Enable Daylight Savings
Click "Next" button to proceed to the next step.

Chapter 4 Quick Setup

Description
Select the time zone of the country yo
set its time based on your selection.
Remain it as default or, you can manually assign an IP address of
Time Server. The information of Timer Server can be found in the
following URL link: http:// www.eecis.udel.edu/~mills/ntp/servers.html
http://www.ntp.org.
The router can also take Daylight savings into account. To enable this
function, check/tick the " Enable Function" box and select the which days
this function will work .
- 7 -
u are currently in. The router will
the
or