Table of Contents
Advertisement
5.4.4
Access Control
WRT-414 provides MAC Address Filtering, which prevents the unauthorized users from accessing your
wireless network.
Parameters
Description
Enable Wireless
Enable or disable the MAC Address Filtering function.
Access Control
Add MAC Address
In the bottom "New" area, fill in the "MAC Address" and "Comment" of the wireless
to the control table
station and then click "Add". Then this wireless station will be added into the "MAC
Address Filtering Table" above.
Remove MAC
If you want to remove some MAC address from the "Current Access Control List",
address from the
select the MAC addresses you want to remove in the list and then click "Delete
table
Selected".
Delete All
If you want remove all MAC addresses from the list, just click this button.
Reset
Click "Reset" will clear your current selections.
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are save successfully. You may press "Continue" for configure other
settings or "Apply" to restart WRT-414 with new configuration.
5.5
QoS
Quality of Service (QoS) refers to the capability of providing better service to selected network traffic. The
primary goal of QoS is to provide priority including dedicated bandwidth, controlled jitter and latency
(required by some real-time and interactive traffic), and improved loss characteristics. When using this
- 41 -
Advertisement
Table of Contents
