Table of Contents
Advertisement
5.2.8
DDNS
DDNS allows you to map the static domain name to a dynamic IP address. You must get an account,
password and your static domain name from the DDNS service providers. This router supports
DynDNS and TZO.
Parameters
Description
Dynamic DNS
Enable/Disable the DDNS function of this router.
Provider
Select a DDNS service provider. The default setting is "DynDNS".
Domain name
Your static domain name that use DDNS.
Account / E-mail
The account that your DDNS service provider assigned to you.
Password / Key
The password you set for the DDNS service account above.
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are save successfully. You may press "Continue" for configure other
settings or "Apply" to restart WRT-414 with new configuration.
5.3
LAN
The LAN Port screen below allows you to specify a private IP address for your router's LAN interface.
- 31 -
Advertisement
Table of Contents
