Access Control - Planet Networking & Communication WRT-414 User Manual

5.7.1

Access Control

This screen allows you to restrict users from accessing certain Internet applications/services (e.g.
Internet websites, email, FTP etc.). Network administrator can define the traffic type permitted in your
LAN and control which PC client can have access to these services.
Parameters Description
Enable MAC Filtering Check "Enable MAC Filtering" to enable MAC Filtering.
If select "Deny", all PCs will be allowed to access Internet accept for the PCs
in the list below.
If select "Allow", all PCs will be denied to access Internet accept for the PCs
in the list below.
Add PC Fill in "Client PC MAC Address" and "Comment" of the PC that is allowed to
access the Internet, and then click "Add". If you find any typo before adding it
and want to retype again, just click "Reset" and the fields will be cleared.
Remove PC If you want to remove some PC from the "MAC Filtering Table", select the
PC you want to remove in the table and then click "Delete Selected". If you
want remove all PCs from the table, just click "Delete All" button. If you want
to clear the selection and re-select again, just click "Reset".
Enable IP Filtering Table Check "Enable IP Filtering Table" to enable IP filter.
If select "Deny", all PCs will be allowed to access Internet accept for the PCs
in the list below.
If select "Allow", all PCs will be denied to access Internet accept for the PCs
- 53 -