Table of Contents
Advertisement
v Press the right navigation button to increase the amount of color in the
image.
Sharpness
This setting adjusts the sharpness of a video image.
v Press the left navigation button to decrease the sharpness.
v Press the right navigation button to increase the sharpness.
Blank screen
The Blank screen setting determines what color is displayed when there is no
active source and when the projector is in standby. Click the left or right
navigation button to change between blue and black.
Reset all
Click the left or right navigation button to reset all the options (except
Language, Video Standard, Rear Projection, and Standby Time) in all the
menus to their original settings.
Audio menu
The following setting allows you to adjust the audio.
Display
A udio
Image
C ontrols
Language
Status
>
>
Volume
Volume
Note: Changing the volume using the menu is the same as changing it using
the keypad.
v Press the left navigation button to decrease the volume.
v Press the right navigation button to increase the volume.
Volume adjustments that you make are saved for each source.
1-18
iLV200/iLC200 IBM Data/Video Projector: User's Guide
Advertisement
Table of Contents
