Table of Contents
Advertisement
This precaution may be particularly important in
rural areas.
CAUTION: Users should not attempt to make such
connections themselves, but should contact the
appropriate electric inspection authority, or
electrician, as appropriate.
This equipment uses the following jacks: CA11A.
European Community (EC) directives
conformity
This product is in conformity with the protection
requirements of EC Council directives 89/336/EEC,
73/23/EEC, and 1999/5/EC on the approximation
and harmonization of the laws of the Member
States relating to electromagnetic compatibility and
safety of electrical equipment designed for use
within certain voltage limits and on radio equipment
and telecommunications terminal equipment.
A declaration of conformity with the requirements of
the directives has been signed by the Director of
Manufacturing and Technical Support, Lexmark
International, S.A., Boigny, France.
Warning: This is a Class A product. In a domestic
environment, this product may cause radio
interference, in which case the user may be
required to take adequate measures.
This product satisfies the Class A limits of the EMC
standard EN 55022 and the safety requirements of
EN 60950. It is compliant with the
telecommunication standard: TBR 21 for use with
Telecommunication Terminal Equipment which is
permitted by Council Directive 1999/5/EC of the
European Parliament and of the Council relating to
Radio & Telecommunications Terminal Equipment.
Network compatibility notices
This equipment has been designed, tested, and
found to be compliant with the essential
requirements of European technical standard
TBR 21 for Pan-European single terminal
connection to the Public Switched Telephone
Network (PSTN).
This applies to all print servers which bear the
following mark:
This equipment is designed to inter-work with
PSTN's that accept analog signals.
However, due to differences between the individual
PSTNs provided in different countries, the TBR 21
certification does not, in itself, give an
unconditional assurance of successful operation
on every PSTN termination point. In the event of
problems, contact your equipment supplier in the
first instance.
There are currently no interoperating difficulties for
the following countries:
Austria
Belgium
France
Germany
Greece
Iceland
Portugal
Sweden
Spain
Norway
Using the print server in Germany
The print server requires a German billing tone
filter to be installed on any line which receives
metering pulses in German. Contact customer
support for ordering information.
The subscriber may request that metering pulses
be placed on the line, or can have them removed
by calling the German network provider. Normally,
metering pulses are not provided unless
specifically requested by the subscriber at the time
of installation.
Using the print server in Switzerland
The print server requires a Switzerland billing tone
filter to be installed on all equipment used in
Switzerland since metering pulses are present on
Notices
50
Denmark
Finland
Luxemburg
Netherlands
Ireland
Italy
United
Switzerland
Kingdom
Advertisement
Table of Contents
