Changing Optional Settings - IBM Infoprint M22 MFP Setup Manual

Using MarkVision
Professional to set fax
information
Note:
Instructions for
installing MarkVision
Professional are in the CD
booklet shipped with the
drivers CD.
Changing optional
settings
Setting up a fax
transmission log
Note:
For a complete list of
fax log options, refer to the
online information on the
MFP CD.
MarkVision Professional is a printer management utility on the
drivers CD.
After installing MarkVision Professional, you can do an IP search to
find the MFP containing the print server and go to the Fax tab to set
the required information. Click Configure
TCP/IP address manager.
Follow the instructions on the screen, and then save your settings
before closing MarkVision Professional.
Optional settings such as setting up a fax transmission log, creating
permanent fax destinations, and enabling the fax server function can
be changed through the MFP control panel, your browser, or
MarkVision Professional. The following optional settings are
explained using the browser method.
When you send or receive a fax, an entry of the activity is recorded in
a file. You can print this file when you want, or specify that it be printed
automatically.
To set the fax transmission log options:
1
Type the IP address of the MFP in the URL field of your
browser, and then press Enter.
2
Click Configuration.
3
Under the MFP heading, click Fax Setup.
4
Click Configuration.
5
Set your options for printing the transmission logs and output
bins.
6
When you finish, click Submit.
See your printer documentation for supported paper sizes, paper
types, and output bins.
Set send and receive fax information
35
TCP/IP, and launch the