Flash Comp - Sony DSC-RX100M3 User Giude

Digital still camera
Hide thumbs Also See for DSC-RX100M3:
Table of Contents

Advertisement

The default setting depends on the shooting mode.
Available flash mode depends on the shooting mode.
[45] How to Use

Flash Comp.

Adjusts the amount of flash light in a range of –3.0 EV to +3.0 EV.
Flash compensation changes the amount of flash light only. Exposure compensation changes the
amount of flash light along with the change of the shutter speed and aperture.
1. MENU →
(Camera Settings) → [Flash Comp.] → desired setting.
Selecting higher values (+ side) makes the flash level higher, and lower values (– side) makes the
flash level lower.
Note
The higher flash effect may not be visible due to the limited amount of flash light available, if the
subject is outside the maximum range of the flash. If the subject is very close, the lower flash effect
may not be visible.
[46] How to Use
Switching the screen display (Shooting)
You can change the display contents on the screen.
1. Press the DISP (Display Setting) button.
Each time you press the DISP button, the recording information display changes as follows:
Graphic Display → Display All Info. → No Disp. Info. → Histogram → Level → For viewfinder* →
Graphic Display
Graphic Display
Display All Info.
Using shooting functions
Using shooting functions
Using the flash
Selecting a screen display mode

Advertisement

Table of Contents
loading

Table of Contents