Smart Remote Embedded - Sony DSC-RX100M3 User Giude

1. MENU → (Wireless) → [One-touch(NFC)] → desired application.
2. Switch this product to shooting mode, then touch an NFC-enabled smartphone to the
on the product for 1-2 seconds.
PlayMemories Mobile launches on the smartphone, and the application you have registered
launches on this product.
Note
When the product is in playback mode, the registered application will not launch even if you touch the
smartphone to the product.
When you call up an application with one touch, even if that application does not work with a
smartphone, PlayMemories Mobile on smartphone will launch. Exit PlayMemories Mobile without
performing an operation. If you do not exit PlayMemories Mobile, the smartphone stays in standby
connection status.
[188] How to Use

Smart Remote Embedded

You can use a smartphone as the remote controller for this product, and shoot still images/movies. Still
images/movies shot via remote control are sent to the smartphone from the product. The application
PlayMemories Mobile must be installed on your smartphone.
1. MENU → (Application) → [Application List] → [Smart Remote Embedded].
2. When the product is ready for the connection, an information screen appears on the product.
Connect the smartphone and the product using that information.
Connection setting methods differ among smartphones.
3. Check the composition of the image on the smartphone screen, and then press the shutter button
(A) on the smartphone to shoot an image.
Use button (B) to change settings such as [EV], [Self-Timer] and [Review Check].
Using Wi-Fi functions Controlling this product using a Smartphone
(N mark)