Ssid/Pw - Sony DSC-RX100M3 User Giude

Note
When you record movies using a smartphone as a remote controller, the monitor of the product
becomes darker. Also, you cannot use the viewfinder for movie recording.
This product shares the connection information for [Smart Remote Embedded] with a device that has
permission to connect. If you want to change the device that is permitted to connect to the product,
reset the connection information by following these steps. MENU →
Reset]. After resetting the connection information, you must register the smartphone again.
Depending on future version upgrades, the operational procedures or screen displays are subject to
change without notice.
[189] How to Use
One-touch connection with an NFC-enabled Android
smartphone (NFC One-touch remote)
You can connect this product and an NFC-enabled Android smartphone with one touch, without
performing a complex setup operation.
1. Activate the NFC function of the smartphone.
2. Switch this product to shooting mode.
The NFC function is available only when the
3. Touch the product to the smartphone.
Using Wi-Fi functions Controlling this product using a Smartphone
(N mark) is displayed on the screen.
(Wireless) → [SSID/PW