12.2.2. AM RF Adjustment
1.
Connect the instrument as shown in Fig. 7.
2.
Set the unit to AM mode.
3.
Set AM-SG to 520 kHz.
4.
Receive 520 kHz in the unit.
5.
Adjust Z101 (OSC) so that the EVM-AC is maximized.
6.
Set AM-SG to 520 kHz.
7.
Receive 600 Hz in the unit.
8.
Adjust Z101 (ANT) so that the EVM-SG is maximized.
12.3. Alignment Points
12.3.1. Cassette Deck Section
12.3.2. Adjustment Point
9.
Set AM-SG to 520 kHz.
10.
Receive 520 kHz in the unit.
11.
Adjust Z101 (OSC) so that the EVM-DC value es with
1.1 ± 0.5V.
SC-HM910/SC-HM810
37