Supplied Accessories; Quick Reference - Sharp Aquos LC-26D40U Operation Manual

Supplied accessories
Make sure the following accessories are provided with the product.
Page
8
Page
8 Page 7
LC-26D40U
LC-32D40U
AQuas
Page 7
Page
6
8QM124S$
• Always use the AC cord supplied with the TV.
QUICK REFERENCE
• Before attaching (or detaching) stand, unplug the AC cord from the AC input terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
• Attach the stand in the correct direction.
• The "REAR" label should be visible from the back of the TV.
• Incorrect installation of the stand may result in the TV falling over.
• Be sure to follow the instructions.
1. Confirm the 8 screws supplied with the TV.
Short screws (X4)
(used in step 2)
""
Long screws (X4)
(used in step 3)
I ~ " , . ; " ,
. . . , . , . · , . ; . : ; , , ; : : : : )
I : ~ " i , :
. . " , i " . " " , ; " i , . : }
I ~ " ; " . , l " i " : , , ; , , i , , . , . : i
1
7 , . . • : , . • " , . " , . • " , . . " , : . )
,
~
m !
3.
CD
Insert the stand into the opening on the bottom of the
TV.
@ Insert and tighten the 4 long screws into the 4 holes on
the rear of the TV.
2. Attach the two parts of the stand unit to each other
using the 4 short screws and the hex key (supplied with
the product) as shown.
Short
screw~
,
~d
'
~
~---
hex key
® _
6 • To detach the stand, perform the steps in reverse order.
1 - hex key
G~~q
@
i i ' i -
Long screw
Soft cushion-~£\'-~~I