Supplied Accessories
Make sure the following
accessories
are provided
with the product.
Remote control unit
"AAA" size battery
Stand unit
Operation manual
Connection guide
(x 1) Page 8
(x 2) Page 9
(x 1) Page 7
(x 1)
(x 1)
,., ..........
J
Always use the AC cord supplied with the TV.
The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
QUICK REFERENCE
0
b,, ......
o Before attaching (or detaching) the stand, unplug the AC cord.
o Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
o Attach the stand in the correct
direction.
o Do not remove the stand from the TV unless using an optional
wall mount bracket
to mount it.
o Be sure to follow
the instructions, incorrect installation of the stand may result in the "iV falling
over.
o After attaching
the stand to the TV, do not hold the stand when you put up, set up, move or lay down the TV.
1
Confirm
that there are 12 screws
(8 long screws
and 4 short
screws)
supplied
with the stand unit.
2 @Set
the post for the stand unit onto
the
polystyrene
foam.
(_Attach
the base to the post.
(_ Insert and tighten the 8 screws
into the 8 holes
on the bottom
of the base.
o Hold the stand unit securely with one hand, and then
tighten the screws.
i
®
4
Insert and tighten
the 4 screws
into the 4 holes on
the rear of the TV.
Iq
F1
_t----
Short screws
_
To detach the stand, perform the steps in reverse order.
o In the installation procedure, be careful not to catch your
fingers between the TV set and the floor.
3
Insert the stand into the openings on the bottom of the TV.
o Make sure that the stand is firmly inserted into the TV.
Improper installation may result in tilting of the TV set.
Soft cushion
\
-, _}.}
Q-7