Sharp Aquos LC-26D40U Operation Manual page 33

Useful adjustment settings
hE: d[
I!I
:SELECT
I!I
:ADJUST
LOCKS
V·CHIP OFF
V·CHIP SET ~
V·CHIP
SETlDTV}~
&2
&JU
[O·9]:SELECT ENTER:SET
EXIT:END
iii
The screen returns to LOCKS menu. Your
new password has been set.
[O·9]:SELECT ENTER:SET
EXIT:END
Enter the same password again to confirm,
then press ENTER.
Input the 4-digit password by using 0-9,
then press ENTER.
Press £./T to select "NEW PASSWORD"
then press
~I ~.
'
Enter a new password using 0-9, then
press ENTER.
Changing the password
Allows you to change your 0urrent password.
Repeat steps 1 to 3 in setting a password.
• The password entering menu displays.
(LOCKS).
Enter the same password again to confirm,
then press ENTER, the password is now
registered and the LOCKS menu will appear
on the screen.
[O·9]:SELECT ENTER:SET
EXIT:END
[O·9]:SELECT ENTER:SET
EXIT:END
LOCKS
_ _ _1
Press MENU and the MENU screen
displays.
Press
~/~
to select
Press
£./T.
The password entering menu
displays.
Select and enter a password (4 digits) using
the number buttons (0-9), then press
ENTER.
"*"
appears instead of the number.
Setting a password
Allows you to use a password to protect certain
settings from being accidentally changed.
IMPORTANT:
Three conditions must be met to enable the V-Chip
CD Password is registered.
® V-CHIP settings have been made.
® "V-CHIP" is set to "ON".
• As a precautionary measure, make a note of your
password and keep it in a familiar place.
• The "V-CHIP SET (DTV)" will only be selectable when
a new rating system can be downloaded via digital
broadcasting in the U.S.
@-32