Sleep Timer - Sharp Aquos LC-26D40U Operation Manual

Useful adjustment settings
Allows you to select what controls the audio output.
Press MENU and the MENU screen
displays.
Press ~/~ to select. (AUDIO).
Press Ji"./T to select "SPEAKERS".
Allows you to set a time when the TV automatically
switches to standby.
- FAVORITE CH -
FAVORITE
o
SLEEP AUDIO AV MODE
cc
_DOD
Press EXIT to return to the normal screen.
SLEEP
Oh07m
SLEEP
2hOOm
SLEEP
Oh10m
Each time you press SLEEP, the remaining
time setting switches as shown below.
SLEEP
OhOOm
step up by 10 minutes
(Sleep timer off)
+
+
+
+
SLEEP
1h50m
This display will disappear after a few
seconds, the sleep timer automatically
starts counting down.
• If you want to adjust the sleep timer again, you
can press SLEEP repeatedly then change the
time setting.
Press SLEEP.
• The remaining time displays when the sleep
timer has been set.
STEREO
25
25
Iii
:ADJUST
rJJ···~
Iii
:SELECT
AUDIO
MTS
BASS
TREBLE
• Sound via speaker is adjusted with
VOL +/- on the remote control unit or
VOL -/+ on the TV.
• Sound via the AUDIO OUTPUT
terminal is not adjustable and outputs
at a consistent level.
• Sound via the AUDIO OUTPUT
terminal is adjusted with VOL +/- on
the remote control unit or VOL -/+ on
the TV.
• Sound via speaker is muted.
Press
~/~
to select "ON" or "OFF".
ON
OFF
• Select "OhOOm" by pressing SLEEP repeatedly to cancel
the sleep timer.
• The TV will enter the standby mode when the remaining
time reaches zero.
@-29