Sharp Aquos LC-26D40U Operation Manual page 18

Watching TV
Press DISPLAY to display the current channel (or
input source) information on the screen.
When the TV receives a digital signal, press once, the
digital information will appear.
• Broadcast program name
• Station name • Remaining time
• Audio language • Program name
• V-CHIP RATING • HD or SD mark
• Closed Caption mark • V-Chip mark
25
A
MUTE
&10
VOL
SURROUND
o
- VOL
+
v
CH A. INPUT POWER
VOLUME
Changing the volume
You can change the volume on the TV or on the
remote control unit.
Using VOL +/-
• To increase the volume, press VOL+.
• To decrease the volume, press VOL-.
• VOL+/- on the TV operates the same as VOL+/- on the
remote control unit.
Using MUTE on the remote control unit
Mutes the current sound output.
Press DISPLAY again, the analog information will appear.
• Clock
• Channel number or VIDEO mode selected
• Channel label (if preset)
• Stereo or SAP (second audio program) audio status
• Content rating
• View mode
SURROUND
o
VOL A
MUTE
&I.
STEREO
SAP
TV-PG L V
SLEEP TIMER 2hOOm
SIDE BAR
TV
ABCD
CABLE
Press DISPLAY again to clear the display.
Press MUTE.
• "MUTE" will be displayed on the screen, and
the sound is silenced.
MUTE
CLOCK 12:00AM SUN
7
• Mute can be canceled if you press VOL+/- or MUTE.
• Analog channel status will display on the screen for
approx. 4 seconds. Digital channel status will display for
approx. 10 seconds.
@-17